The Vitality™ Series Leg Curl features a walk-in setup and adjustable start position to customize the workout. A fixed shin pad and self-aligning ankle pad provide comfort and convenience for the user. Ratcheting back pad allows for easy knee-to-pivot alignment. Users can easily engage the add-on weight with a simple push of a lever to increase the work load.
The lower leg pad is self adjusting, enable the user to get in and get started while remaining comfortable during the movement.
The start position is designed to fit all users and can be easily adjusted from the start position.
Reducing sheer force on the knee joint is important with this unit. The adjustable back pad allows for proper knee-pivot alignment to do so.
Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts.
Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizesfitted nylon bushings to ensure smooth travel on guide rods.
Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight. Precision, lubricated bushings for smooth operation.
Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position.
Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).
Quick and easy ratcheting seat adjustment with easy to identify seat position numbering.
Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder.
ABEC-rated sealed bearings for added durability and smooth feel.
Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation. Cables are military spec 5 mm cable coated.
11 gauge (2.75 mm) 2×4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability.
Walk-in setup and adjustable start positions. Self-aligning ankle pad.
Translucent
All Spice
American Beauty
Black
Blue Jay
Burgundy
Deep Clay
Grey
Hunter Green
Navy
New Purple
Regal Blue
Slate
170 lbs / 78 kg
67 x 43 inches / 171 x 109 cm
Black
Gloss Metallic Silver
64 in / 163 cm
45 in / 114 cm
457 lb / 208 kg
61 in / 155 cm
60 inches / 152 cm
48 inches / 122 cm
42 inches / 107 cm
615 lbs / 279 kg
Yes
Yes