The movement arm of the Discovery™ Series Selectorized Line Seated Row features a low, forward-set pivot for an optimal motion path and positive user experience. Angled triple-grip handles create a wide range of user start positions with no chest pad adjustments needed.
The upright, open design makes this unit approachable and easy to access. No climbing over center arms or unnecessary obstacles.
Angled triple-grip handles allow for a wide range of user start positions with no chest pad adjustments needed.
Along with easy to enter and exit, the chest pad requires no adjustments to use. It provides optimal user stabilization throughout the movement.
Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Yes, gas-assisted ratcheting seat adjustment
Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.
Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.
Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.
Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.
Movement arm features low, forward-set pivot for optimal motion path. Angled triple-grip handles create wide range of user start positions; no chest pad adjustments needed.
5 lb (2.3 kg)
240 lbs / 109 kg
Gloss Metallic Silver
Black Magic Gloss
52 L x 49 W inches / 132 L x 124 W cm
51 inches / 130 cm
49 inches / 125 cm
508 lbs / 230 kg
59 inches / 150 cm
580 lbs / 265 kg