A foot assist bar on the Discovery™ Series Selectorized Line Chest Press allows the user to begin exercise in an advantageous pre-stretch start position. The movement arm features a forward-set low pivot for proper motion path. The ratcheting gas-assisted seat adjusts easily and fits a wide range of users.
The unique foot advance allows users to easily get into the proper start position while stretching muscles prior to starting the movement.
The low pivot of the movement arm ensures proper path of motion and easy entrance/exit to and from the unit.
The various grip options allow for a wide and narrow grip movements, providing exercise variety.
Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Yes, gas-assisted ratcheting seat adjustment
Ratcheting seat adjustments require only a lift to release the lever. Handles include slip resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.
Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.
Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.
The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.
Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.
Movement arm features forward-set low pivot for proper motion path. Ratcheting gas-assisted seat adjusts to fit wide range of users.
5 lb (2.3 kg)
240 lbs / 109 kg
Gloss Metallic Silver
Black Magic Gloss
64 L x 59 W inches / 163 x 150 cm
58 inches / 147 cm
59 inches / 150 cm
530 lbs / 240 kg
59 inches / 150 cm
590 lbs / 268 kg