Inquire -->

Precor DSL0605 Leg Extension

The start position, roller pad, and spring-assisted back pad on the Discovery™ Series Selectorized Line Leg Extension all adjust easily from the seated position, providing a comfortable fit and supporting proper exercise mechanics.

Features

  • Easy Back Adjustment

    The spring-assisted back pad easily adjusts from the seated position so the exerciser can properly set up the unit while seated.

  • Personalized Fit

    Both the start position and roller pad easily adjust to ensure the unit fits the exerciser for proper form throughout the exercise.

  • Exerciser-Friendly Weight Stack

    The weight stack uses a simple pin adjustment that exercisers can easily reach from the seated position.

Equipment Features

  • Weight Stack

    Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
    Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
    The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
    The weight stack is elevated to facilitate user pin selection from seated position.

  • Upholstery

    Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.

  • Adjustable Seat

    Yes, gas-assisted ratcheting seat adjustment

  • Adjustments

    Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.

  • Instructional Placard

    Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.

  • Bearings and Pivot Points

    Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.

  • Water Bottle and Accessories Holder

    The drink-and-accessory holder features large open, even surfaced area, easily accessable and easy to keep clean.

  • Pulleys and Cables

    Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.

  • Frame and Finish

    The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.

  • Bolt Down Capability

    Yes

  • General Features

    Spring-assisted back pad adjusts easily from seated position. Start position and roller pad adjust for optimal exercise mechanics.

Equipment Specifications

  • Incremental Add-on Weight

    5 lb (2.3 kg)

  • Standard Shroud Color

    Pacific Blue
    Dark Cavern
    Black

  • Weight Stack

    240 lbs / 109 kg

  • Standard Upholstery Colors

    All Spice
    American Beauty
    Black
    Blue Jay
    Burgundy
    Deep Clay
    Grey
    Hunter Green
    Navy
    New Purple
    Regal Blue
    Slate

  • Standard Frame Colors

    Gloss Metallic Silver
    Metallic Ash
    Desert Bronze
    Black Magic Gloss
    Gloss White
    Black Pearl

  • Workout Area (L x W)

    66 L x 50 W / 168 L x 127 W

Equipment Dimensions and Weight

  • Length

    53 inches / 135 cm

  • Width

    49 inches / 125 cm

  • Equipment Weight

    575 lbs / 261 kg

  • Height

    59 inches / 150

Shipping Dimensions and Weight

  • Shipping Weight

    625 lbs / 283 kg

Regulatory

  • EN957

    Yes

  • ASTM

    Yes