Precor DSL0606 Prone Leg Curl

Equipment Features

• Instructional Placard

  Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.

• Weight Stack

  Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
  Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
  The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
  The weight stack is elevated to facilitate user pin selection from seated position.

• Upholstery

  Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.

• Adjustments

  Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.

• Water Bottle and Accessories Holder

  The drink-and-accessory holder features large open, even surfaced area, easily accessable and easy to keep clean.

• Frame and Finish

  The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.

• Bearings and Pivot Points

  Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.

• Pulleys and Cables

  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.

• Bolt Down Capability

  Yes

• General Features

  Easy entry allows user to align knee joint with pivot for proper exercise mechanics. Ankle roller pad adjusts for varying leg length.

Equipment Specifications

• Incremental Add-on Weight

  5 lb (2.3 kg)

• Standard Shroud Color

  Pacific Blue
  Dark Cavern
  Black

• Weight Stack

  200 lbs / 91 kg

• Standard Upholstery Colors

  All Spice
  American Beauty
  Black
  Blue Jay
  Burgundy
  Deep Clay
  Grey
  Hunter Green
  Navy
  New Purple
  Regal Blue
  Slate

• Standard Frame Colors

  Gloss Metallic Silver
  Metallic Ash
  Desert Bronze
  Black Magic Gloss
  Gloss White
  Black Pearl

• Workout Area (L x W)

  47 L x 61 W inches / 119 L x 155 W cm

Equipment Dimensions and Weight

• Length

  61 inches / 155 cm

• Width

  48 inches / 122 cm

• Equipment Weight

  497 lbs / 225 kg

• Height

  59 inches / 150 cm

Shipping Dimensions and Weight

• Shipping Weight

  555 lbs/ 252 kg

Regulatory

• EN957

  Yes

• ASTM

  Yes