Precor DSL0618 Glute Extension

Equipment Features

• Instructional Placard

  Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.

• Weight Stack

  Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
  Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
  The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
  The weight stack is elevated to facilitate user pin selection from seated position.

• Upholstery

  Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.

• Adjustable Seat

  Yes, gas-assisted ratcheting seat adjustment

• Adjustments

  Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.

• Water Bottle and Accessories Holder

  The drink-and-accessory holder features large open, even surfaced area, easily accessable and easy to keep clean.

• Frame and Finish

  The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.

• Bearings and Pivot Points

  Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.

• Pulleys and Cables

  Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.

• Bolt Down Capability

  Yes

• General Features

  Curvilinear motion path does not require hip alignment. Long movement arm encourages knee extension for full gluteal involvement. Elbow pad, handles and large base platform stabilize the user during exercise.

Equipment Specifications

• Incremental Add-on Weight

  5 lb (2.3 kg)

• Standard Shroud Color

  Pacific Blue
  Dark Cavern
  Black

• Weight Stack

  160 lbs / 73 kg

• Standard Upholstery Colors

  All Spice
  American Beauty
  Black
  Blue Jay
  Burgundy
  Deep Clay
  Grey
  Hunter Green
  Navy
  New Purple
  Regal Blue
  Slate

• Standard Frame Colors

  Gloss Metallic Silver
  Metallic Ash
  Desert Bronze
  Black Magic Gloss
  Gloss White
  Black Pearl

• Workout Area (L x W)

  84 L x 40 W inches / 213 L x 102 W cm

Equipment Dimensions and Weight

• Length

  53 inches / 135 cm

• Width

  40 inches / 102 cm

• Equipment Weight

  448 lbs / 203 kg

• Height

  59 inches / 150 cm

Shipping Dimensions and Weight

• Shipping Weight

  510 lbs / 232 kg

Regulatory

• EN957

  Yes

• ASTM

  Yes